Follow us in f

Replacement & Custom Industrial Machine Knives

Cutting Edges, Made To Fit Your Machine

Granulator, shredder, wood chipper and pelletizer knives from our factory in Ma'anshan, China. Send your machine model, drawing or a photo of the old blade.

Factory direct Own factory in Ma'anshan, China
Fits major machine brands OEM-equivalent replacement knives
Drawing or sample Custom sizes, steels and edges
Reply within 12 hours With price and lead time

Sound Familiar?

Knives wearing out, chipping or holding up your line?

Find the one you see on your machine. Each card shows the likely cause, what we change, and the proof you get before you place an order.

Close-up of a worn industrial knife edge Case 01 · Wear

Edges Wear Out Too Fast

You See
Rounded edges, more fines and dust, regrinding every few days.
Cause
Abrasive fillers or glass in the feed; hardness set too low for the material.
We Do
Compare alloy and hardness options after checking your worn knife or photos.
+30–50% Longer edge life reported by our customers
You get: hardness test record
Chipped industrial knife edge Case 02 · Chipping

Edges Chip or Crack

You See
Notches along the edge, broken corners, cracks after impact.
Cause
Metal or stone in the feed, steel too hard and brittle, knife gap not set right.
We Do
Recommend a tougher grade and lower hardness, adjust the edge angle and advise the correct knife gap.
Fewer stops From edge breakage and unplanned feed
You get: material certificate
Wooden export crates prepared for knife shipment Case 03 · Lead Time

Machines Wait for Knives

You See
Line stopped while the right knife is identified, quoted and made.
Cause
No drawing on file, no spare set planned, slow back-and-forth with the supplier.
We Do
Keep your drawing on file under a part number, so repeat orders skip review. Spare sets can be scheduled ahead.
15–25 days Production time, faster for repeat orders
You get: lead time written in your quotation
Knife drawing and cost comparison Case 04 · Cost

Knife Cost per Ton Too High

You See
Cheap knives that need frequent regrinding and changeovers.
Cause
Short service life; price compared per piece instead of per ton processed.
We Do
Give you a written comparison of price, service life, regrinds and downtime before you order.
Lower cost / ton Based on your own operating data
You get: written cost comparison
✓
Free Technical Assessment

Send photos of your knife. An engineer replies with the likely cause and a recommendation within [24 h].

✓
Trial Set Before Bulk

Test [one set] on your own machine before you commit to a larger order.

✓
Photos Before Shipping

You receive inspection photos and records, and approve them before the knives leave the factory.

✓
Out Of Tolerance, We Remake

If a knife is outside the agreed drawing tolerance, we replace it at our cost.

Products

Knives for crushers, chippers, pelletizers, shredders and more

Below are four of our main ranges. We also make shredder knives, scrap shear blades and other machine knives, matched to your machine model or made from your drawing or a worn sample in our own factory in Ma'anshan, China.

View all products
Plastic crusher and granulator knife reference
Plastic Crusher Blades
Plastic
Crusher Blades
Granulator knives Materials: SKD11 · D2 · DC53 · HSS
Send your drawing or photo

Plastic Crusher Blades

Rotor and bed knives for plastic crushers and granulators.

Type
Rotor / bed / flat knives
Steel
SKD11 / D2 / DC53 / HSS
Hardness
HRC 57–61
Length
150–2,000 mm
Pelletizer cutting rotor and knife reference
Pelletizer Knives & Cutters
Pelletizer
Knives
Strand cutting rotors & bed knives Made to your drawing or sample
Send your drawing or photo

Pelletizer Knives & Cutters

Cutting rotors, bed knives and die-face blades for pelletizing lines.

Type
Rotors / bed / die-face
Steel
Chosen for your polymer
Hardness
Set to your polymer
Send Us
Model, drawing or photo
Wood chipper replacement blade reference
Wood Chipper Blades
Wood Chipper
Blades
Replacement chipper knives Materials: H12 · A8MOD · DC53 · HSS
Send your drawing or photo

Wood Chipper Blades

Chipper and counter knives for drum and disc chippers.

Type
Chipper / slotted / counter
Steel
H12 / A8MOD / DC53 / HSS
Hardness
HRC 57–61
Edge Angle
To your sample or drawing
Custom industrial knife components reference
Custom Industrial Blades
Custom
Industrial Blades
Plastics · Recycling · Wood · Steel Made to drawing or sample
Send your drawing or photo

Custom Industrial Blades

Flat, toothed and circular blades for plastics, recycling, wood and metal.

Type
Flat, toothed, circular, inserts
Steel
SKD11 / D2 / DC53 / SKD61 / A8MOD / HSS
Hardness
Set to your material
Send Us
Drawing, sample or photo
Custom · Drawing or Sample
Can't find your knife here?

Send a drawing, a worn sample or clear photos with main dimensions. We reply within 12 hours.

Send drawing / photos

Product specifications are reference options. Actual material, hardness, dimensions and knife compatibility must be confirmed against the machine and approved drawing or sample.

Industries

Built for the recycling floor, matched to what you cut

Tell us the material and the machine. Feedstock, contamination and cutting setup decide the steel, hardness and edge of your knives.

Real recycled HDPE plastic flakes from plastic recycling process Plastic & Rubber Recycling
01 / Plastic & Rubber

Plastic & Rubber Recycling

Crusher, granulator and shredder knives for bottles, film, pipe, purge lumps and rubber. Steel and edge angle chosen for your material.

PET HDPE PP Film PVC Pipe Rubber
Plastic recycling knives View
Real industrial wood chip stockpile and conveyor systems at a processing facility Wood Chipping & Biomass
02 / Wood & Biomass

Wood Chipping & Biomass

Chipper and hogger knives for logs, pallets, branches and biomass fuel. Tough enough for applications involving nails, sand and bark grit.

Logs Pallets Branches Bark Biomass
Wood chipper knives View
Real hydraulic scrap shear equipment used for scrap metal processing Scrap Metal Recycling
03 / Scrap Metal

Scrap Metal Recycling

Shear blades for heavy scrap, rebar and car bodies. Made to take the shock cut after cut without chipping.

HMS Rebar Profiles Car Bodies Sheet
Scrap shear blades View

Illustrative photographs only; not XT Blades installations. Plastic regrind: Soddaa (CC BY-SA 4.0) ; wood-chip stockpile: Quintin Soloviev (CC BY 4.0) ; hydraulic scrap shear: Germanylinefoto (CC BY-SA 3.0) . Images are cropped to fit the card layout.

Machines

Knives for the machine you run, matched by brand and model

Send us your machine brand and model, plus a drawing, sample or photo of the worn knife. We confirm the fit before production.

Find your machine in Machines & Models
Industrial shredding and granulating equipment with conveyor system
Plastic granulator equipment photo
01 / Plastic

Crushers & Granulators

Rotor knives, bed knives and full sets for plastic crushers and granulators. SKD11, D2 or DC53 options, subject to specification.

Fits machines such as*
ZERMA Herbold GALA + more
Crusher & granulator knives
Actual industrial shredder cutting rotor processing plastic material
Industrial shredder equipment photo
02 / Plastic · Tire · Waste

Industrial Shredders

Single-shaft rotor knives and twin-shaft cutters with spacers, matched to machine series and rotor position.

Fits machines such as*
Lindner Condux Vecoplan + more
Shredder knives
Wood chipper operating during forest thinning work
Wood chipper field equipment photo
03 / Wood

Wood Chippers

Drum and disc chipper knives plus counter knives for timber, pallets and biomass. H12, A8MOD or DC53 options, subject to specification.

Fits machines such as*
Vermeer Bandit Morbark + more
Wood chipper knives
Scrap metal recycling yard with material handling cranes
Scrap metal processing equipment photo
04 / Metal

Scrap Shears

Upper and lower blades for hydraulic scrap shears and shear-balers. H13 or X45 options for demanding cutting applications.

Fits machines such as*
Harris Lindemann Metso + more
Scrap shear blade enquiry
Not Listed?
Tell us your machine brand, model and knife position.

No drawing? A photo of the old knife is enough to start. We reply within 12 hours.

Send machine details

* Brand names are used for reference only. XT Blades is not affiliated with these manufacturers. Exact knife compatibility requires confirmation using the machine model, knife position, drawing or sample.

Illustrative third-party equipment photographs, not XT Blades factory or customer installations. Photo credits: 01 Woodchipper82 (CC BY-SA 3.0) ; 02 Soddaa (CC BY-SA 4.0) ; 03 USDA Forest Service / Andrew Avitt (Public Domain) ; 04 Digitura (CC0) . Images are displayed with square cropping for card layout.

Process & Service

From drawing to delivery, and after

One team handles your part from the first question to the next reorder. At every step you know what happens next and what you receive.

Our order in 4 steps

Typical timeline
01 · Today

Send your part

Drawing, photos or a worn sample, plus machine model and quantity.

You get Drawing check, confirmed in writing
02 · Within 24 h*

Get a quote

Geometry, steel and hardness reviewed for your machine and material.

You get Price, steel, hardness, lead time
03 · 15–25 Days*

Make & inspect

Heat-treated and ground in our factory, then measured to your drawing.

You get Inspection report and photos
04 · Shipping

Delivered

Oiled against rust, packed in wooden cases, each knife labelled by position.

You get Packing list, agreed documents, tracking
After-Sales After delivery

Mia Lin

After-Sales & Quality

“Send photos of your worn blades. I will help review the wear and what to adjust for the next batch.”

Phone / WhatsApp
+86 139 0225 1786
Chat on WhatsApp
  • Wear feedback & tuning
  • Reorder by part number
  • Out-of-spec claims reviewed under agreed terms
Factory Ma'anshan, China
MOQ Confirm per part
Samples On request
Payment T/T, L/C*
Incoterms EXW, FOB, CIF*
Port Shanghai*
We reply within 12 hours Start with a drawing

* Quotation timing, production lead time, payment method, shipping terms and port are subject to part review and written confirmation.

Certificates

Checked before it ships, documented for you

Download our certificate and sample reports. Every order ships with the same report, filled in with your part's measured numbers.

Document availability: Original certificate scans and sample reports will be available after the corresponding documents are uploaded and checked. Certificate details must match the actual issuer and validity records.

Recent Orders

Shipped to recyclers worldwide, with the records to match

A few recent orders from our own factory in Ma'anshan: the part, the machine it fits and the documents that went with it. Customer names are withheld.

Running a similar machine? Send us the model or a photo of your worn knife.

We reply within 12 hours Get a quote →

Order information pending: The highlighted fields and document labels are examples for layout review. Replace with verified anonymized order data before publishing.

Blog · Knife Knowledge

Know your blades, cut longer

Practical guides from our engineers on wear, steel choice and maintenance. Written for the people who run the machines.

Watch us work · YouTube
Visit our channel

Grinding a 1,200 mm granulator knife

Ultrasonic flaw check before shipping

Packing an export order of shear blades

FAQ · First Order

Before your first order

You do not need to solve every technical detail before getting in touch. Start with the information you already have.

Question not listed here?

Send it to our engineers. We reply within 12 hours.

+86 139 0225 1786
I don't have a drawing. Where do I start?

Start with clear photos of the knife from the front, side and cutting edge, plus any dimensions and machine brand or model you know. A physical sample can also be reviewed. Tell us if the knife has been reground or repaired because its current dimensions may differ from the original part.

Can I start with a trial quantity?

Trial quantities can be discussed after the knife geometry, material and manufacturing process are reviewed. For a new or modified knife, a smaller first order can help confirm fit and cutting performance before repeat production. Minimum quantity and pricing depend on the part.

Which steel and hardness should I choose?

The choice depends on the processed material, contaminants, impact load, cutting speed and how the current knife wears or fails. We compare options such as D2 or SKD11, DC53, H13, A8 modified, HSS and carbide, then recommend a hardness range that balances wear resistance and toughness.

When can the knives reach us?

Lead time depends on drawing confirmation, material availability, order quantity, heat treatment, grinding and the delivery destination. Share your required arrival date and country with the enquiry. We confirm the production and shipping schedule after the technical details are reviewed.

Knife Enquiries

Let’s get your next knife order right.

You do not need every detail ready. Send a drawing, sample photo or machine reference, and tell us what you need to replace.

Reply within 12 hours

For a quick review

Include the knife type, machine reference, quantity and delivery destination when available.

For an existing order

Include the order reference with any photos and operating details related to your question.

Request a Quote

Send your drawing. Get a clear quote.

Send a drawing, sample photo or clear knife details. Include the machine model, required quantity and delivery destination for a faster review.

Reply within 12 hours
No drawing? Photos or a sample also work

Industrial knife enquiry

Share the essentials for a quick technical review and quotation.

RFQ Form
Choose files PDF, DWG, JPG or PNG
Up to 4 files, 10 MB each and 20 MB total. Attachments are sent with this enquiry.